Brushless ESC used by a ton of people and recommended by a ton of people. If you have any issues or questions MR DINKY is very helpful.

The following information is from DINKYs website

Features:
• Cross-platform Wifi access on all devices
• Simple "Plug n' Play" access thru Wifi-Link
• Integrated Wifi-Link controllable BEC voltage
• Hi-performance ESCape32 Firmware
• Hard-mounted PH2.0 3pin Motor plug
• Custom programmable startup tones
• Future-proof Wifi-Link programmer compatible (sold separately)
• Sensorless brushless & brushed modes
• Advanced brushed mode settings
• Sinusoidal brushless mode for slow speed crawler control
• Programmable Low-Voltage Cutoff & Drag Brake
• Integrated Voltage Sensor
• Telemetry (KISS, KISS auto, iBUS, S.Port, CRSF)
• Anti-arching and parasitic voltage spike protection
  **TVS Diode offers protection against:
   1) While plugging in your battery (arching during connection)
   2) Rapid motor braking when damped mode is enabled

Specs:
• MCU: STM32G071
• Firmware: ESCape32 Rev. 14.5 "ESCAPE5"
• Voltage: 2-6S (5-6S use external 470uF cap)
• Current: 25A (50amp Burst)
• Sensors: voltage
• BEC: 5.5/6.5/7.4/8.4V 5A continuous
• Size: 30mm x 12mm x 6mm

Latest ESCape32 Firmware version, settings explained, music files, and more info available here, or within the "More" tab drop-down menu on our home page. Please checkout the new list of "tunes" for your startup tones, to customize your ride even more!